Selective Frame 35mm Negative Scanning Services

Professional digitization of selective 35mm negative frames in filmstrips of 2-6 frames, color or black & white. If you don't want all frames from your 35mm negative filmstrips scanned then you're in the right place. This will require more work on your part but all you need to do is follow the instructions on this page. Since this service is similar to our normal 35mm negative scanning service where all frames are scanned we are only going to note the differences on this page. All processing options are available, however, we only offer scan resolutions of 2000-4000ppi for this service. For prices please refer to the link below (selective frames row in the table). No volume discounts are available for selective frame scanning.

Your 35mm negative filmstrips must be 2-6 frames in length. Strips longer than 6 frames must be cut in order to be scanned. Frames must be well marked by frame number using one of the methods described below so we know EXACTLY what frames to scan.

It is extremely important that you clearly label the frames you want scanned. If you don't follow one of the two methods clearly described here we may not scan the correct frames, so please follow our guidelines.

Method 1 - If your negatives are in clear archival storage sheets or sleeves.
Write the frame number directly on the sheet over the frame to be scanned, or write the frame number on a piece of tape/sticker and then place it directly above the frame to be scanned. Use a soft felt-tip marker that will not damage the film if you write directly on the sheets!!! Below left you can see frame numbers written directly on the archival sheet. Below right you can see frame numbers written on tape and placed over the frames to be scanned.

If a frame has two numbers under it write both. Above you see frame 0 on the left and frame 2A/3 on the right. Frames with no numbers or letters need to be described by placement in the strip and subject matter. Circling a frame is not good enough because negatives can shift around during shipping.

Method 2 - If you have loose negatives.
For each roll of film, write the frame numbers you want scanned on the front of an envelope. Obviously all the frames in each envelope must have a unique frame number. Again, if a frame has two numbers below it write both of them (ex. 12A/13). Only send a filmstrip if there is a frame on it you want scanned.

If your negatives have protective film (above left) on them it must be removed before we can scan your film. We will remove it for you but it will not be replaced or returned. If you remove this, remember that film is extremely delicate, so make sure to avoid getting fingerprints on it or bending it. It should be handled by the edges with cotton gloves on.

Regardless of the marking method you use we strongly recommend reinforcing the film with cardboard to avoid any bending during shipment, even if you are shipping it in a box. You will definitely want to reinforce your film if you are mailing it in an envelope. Basically, make sure the film is packaged appropriately and securely for shipping.